rogers pcb material

PCB material stock quick delivery!

rogers pcb material

rogers pcb material

Layers: 6 Layers
Surface finish: ENIG

Inquiry now



FR-4 material provides the base standard for PCB substrates, delivering a widely effective balance between cost, manufacturability, electrical properties, durability and performance.

But when advanced electrical properties and performance are critical to your designs, Rogers Corporation’s materials delivers:

  • Lower Dielectric loss

  • Low electrical signal loss

  • Wide range of Dk (dielectric constant) values (2.55-10.2)

  • Low cost circuit fabrication

  • Low outgassing for space applications

Andwin Circuits can deliver your RF, Microwave and mobile designs with the same industry-leading lead times, quality, and extreme customer support you’ve come to expect from all our services, only now with better advanced PCB material dielectric properties.

What is Rogers PCB?

Rogers is a type of high-frequency board produced by Rogers. It is different from the conventional PCB board—epoxy resin (FR4). It has no glass fiber in the middle and uses a ceramic base as the high-frequency material. Rogers has superior dielectric constant and temperature stability. Its dielectric constant thermal expansion coefficient is very consistent with copper foil, which can be used to improve the deficiencies of PTFE substrates. It is very suitable for high-speed electronic design, commercial microwave, and radio frequency applications. Its low water absorption is ideal for high-humidity applications, providing customers in the high-frequency board industry with the highest quality materials and related resources, which fundamentally enhance product quality.

Stack up of Rogers PCB

  • Woven Glass Reinforced Modified Epoxy Laminates

  • Woven Glass Reinforced PTFE Antenna Grade Laminates

  • Cross-Plied Woven Glass Reinforced PTFE

  • Woven Glass Reinforced Modified Epoxy IMS

  • Hydrocarbon / Ceramic / Woven Glass UL 94 V-0 Laminates

  • PTFE Ceramic

  • Hydrocarbon / Ceramic / Woven Glass

  • Filled PTFE Composite

  • PTFE Random Glass Fiber

Rogers RO4350B high frequency PCB

Why use Rogers printed circuit boards?

High frequency PCBs and RF PCBs often need high performance with low signal losses, low electrical noise, or high board temperatures. To meet this need Rogers Corp. PCB materials are often used as they are cost effective vs. many of the alternatives.

2layers ceramic pcb

Benefits Of Rogers PCB

PCBs manufactured using Rogers high frequency laminates offer several beneficial features when used in dynamic thermal environment. The reasons why we at Sierra Assembly use the rogers pcb materials in our fabrication process are:

  • Improved impedance control

  • Better thermal management

  • Low moisture absorption

  • Low cost circuit fabrication

  • Low outgassing for space applications

Get in touch now!

Typical Applications

  • Microwave equipment of all kinds.

  • Cellular Base Station Antennas and Power Amplifiers

  • Microwave point to point (P2P) links

  • Automotive Radar and Sensors

  • RF Identification (RFID) Tags

  • LNB’s for Direct Broadcast Satellites

  • Rogers series is often used in RF PCBs with frequencies 6+ GHz and in high heat applications that need ceramic laminates and low signal losses. It may also be used to minimize electrical noise to meet stringent performance requirements.

About Andwin Circuits

Andwin Circuits as a industry leading of PCB manufacturer since 2003.

Specializing in multilayer PCB, Rigid flex PCB, HDI PCB, controlled impedance PCB and Radio Frequency circuit, from quick turn prototype to mass products.

Get in touch now!

Get professional one stop PCB solution from us!