RT duroid 6202PR high frequency circuit material
RT duroid 6202PR high frequency circuit material is a low loss and low dielectric
constant laminate offering superior electrical and mechanical properties essential
in designing complex microwave structures which are mechanically reliable and
electrically stable and used for planar resistor applications.
Excellent dimensional stability (0.05 to 0.07 mils/inch) is achieved by the addition of
limited woven glass reinforcement. This enables the manufacture of tight tolerance
planar resistors.
¼ oz. to 2 oz./ft.2
electrodeposited copper foil , ½ oz., 1 oz. and 2 oz. rolled copper foil,
½ oz., 1oz. and 2 oz. reverse treated foil and ½ oz. and 1 oz. electrodeposited copper
foil with a resistive layer, may be specified as cladding on 0.005” (0.127mm), 0.010”
(0.254mm), 0.015” (0.381mm), & 0.020” (0.508mm) standard dielectric thicknesses. RT/
duroid 6002PR (non-reinforced) available in 0.020 and 0.030 dielectric thicknesses.
Applications particularly suited to the unique properties of RT/duroid 6202PR material
include flat and non-planar structures such as antennas and complex multi-layer
circuits with inter-layer connections
Fetures of RT duroid 6202PR high frequency circuit Material
- Low Loss
• Excellent high frequency
performance
Excellent mechanical and electrical
properties
• Reliable multi-layer board
constructions
Tight dielectric constant and thickness
controls
Extremely low thermal coefficient of
dielectric constant
• Excellent dimensional stability
In-plane expansion coefficient matched
to copper
• Allows for more reliable surface
mounted assemblies
• Ideal for applications sensitive to
temperature change
• Excellent dimensional stability
RT duroid 6202PR high frequency circuit Material applications
• Phased Array Antennas
• Ground Based and Airborne Radar
Systems
• Global Positioning System Antennas
• Power Backplanes
• High Reliability Complex Multilayer
Circuits
• Commercial Airline Collision Avoidance
Systems
• Beam Forming Networks
RT duroid 6202PR high frequency circuit material datasheet
RT duroid 6202PR high frequency circuit Material standard thickness
0.005” (0.127mm) +/- 0.0005”
0.020” (0.508mm) +/- 0.0010”
0.030” (0.762mm) +/- 0.0010”
*Additional non-standard thicknesses
available from 0.005” – 0.060” in varying
increments
RT duroid 6202PR high frequency circuit Material standard size
12” X 18” (305mm X 457mm)
24” X 18” (610mm X 457mm)
*Additional panel sizes available
RT duroid 6202PR high frequency circuit Material standard Copper clad
Electrodeposited Copper Foil
½ oz. (18µm) HH/HH
1 oz. (35µm) H1/H1
*Additional claddings, such as
resistive foil and unclad are available
Rolled Copper Foil
½ oz. (18µm) 5R/5R
1 oz. (35µm) 1R/1R
RT duroid 6202PR high frequency circuit Material price
RogersRT duroid 6202PR price is very high, from 100 to 600 USD/sheet,
The price depend on the rogers 3035 substrate thickness,copper thickness,
Rogers RT duroid 6202PR substrate size etc.
Andwin use Rogers RT duroid 6202PR to make mass PCB production,
Many types Rogers RT duroid 6202PR are in stock,also, have good offer from Rogers factory.
If you need Rogers RT duroid 6202PRor raw material,
Please contact us to get the supper good RogersRT duroid 6202PR price.